2026 SANY® Backhoe Loader BHL95

Information

2026 SANY® Backhoe Loader BHL95

BHL95

The SANY BHL95 backhoe loader is a versatile, high-performance machine engineered for American contractors, utility crews, municipalities and rental fleets that need one reliable unit to handle digging, trenching, loading, backfilling and material handling across diverse jobsites. Equipped with a factory-installed telescopic extendable stick, it provides exceptional reach—digging to a full 17.7 ft deep and extending nearly 22 ft from the swing pivot—allowing crews to trench deeper, place materials farther or work around obstacles without constantly repositioning the machine for greater efficiency and reduced cycle times. It comes fully job-ready out of the box with a hydraulic 4-in-1 multi-purpose loader bucket for clamping, grading and dozing, a standard heavy-duty backhoe bucket and both front and rear two-way auxiliary hydraulic lines to power attachments like breakers, augers, thumbs or grapples without the extra expense or hassle of aftermarket plumbing kits.

Features may include:

  • 4WD Powershift Transmission with Limited Slip Differential
  • Telescopic Stick
  • Load Sensing Hydraulic with Pilot Controls
  • Boom Float and Return-to-Dig Standard
  • Flip-over Pads and Outrigger Cylinder Guards
  • Standard Breaker Line and ISO/SAE Pattern Change
  • 8 Working LED Lights Plus Traffic Lights
  • Air Suspension Seats with 3" Retractable Seatbelt
  • AM/FM Bluetooth Radio (cab model only)
  • ROPS/FOPS Certified for earthmoving and agriculture

Photos

Highlights

  • Tampa, Florida
  • 2026
  • SANY®
  • Backhoe Loader BHL95
  • TCD3.6-L4 - Low Maintenance T4F
  • ZF 4WD — 4 Speed Forward/Reverse
  • Available
  • Cab: 3,129 mm 10' 3" │Maximum Digging: 5,985 mm 19' 8" │Maximum to Bucket Hinge Pin: 3,478 mm 11' 5" │Operating: 4,293 mm 14' 1"

Specifications

  • 2026
  • SANY®
  • Backhoe Loader
  • BHL95
  • General
  • TCD3.6-L4 - Low Maintenance T4F
  • Deutz
  • Gross: 74 kW @ 2,200 rpm 99 hp @ 2,200 rpm / Net: 70.8 kW @ 2,200 rpm 95 hp @ 2,200 rpm
  • 410 Nm @ 1,600 rpm 302.4 lbs-ft @ 1,600 rpm
  • 3.6 L 220 in³
  • ZF 4WD — 4 Speed Forward/Reverse
  • Gear 1: 4.8 km/hr 3 mph / Gear 2: 9.6 km/hr 6 mph / Gear 3: 19.3 km/hr 12 mph / Gear 4: 35.4 km/hr 22 mph
  • Bucket Breakout Force—Excavator: 55 kN 12,364 lbf / Bucket Breakout Force—Loader: 50 kN 11,240 lbf
  • Operating: 24.9 MPa 3,611 psi ¦One-way Aux Line Max: 16 MPa 2,320.6 psi
  • System: 156 l/min 41.2 gal/min ¦One-way Aux Line Max: 140 l/min 37 gal/min
  • Main: Kawasaki Variable Displacement—Axial Piston ¦Power: 39 kW @ 2,200 rpm / 52.3 hp @ 2,200 rpm
  • Maximum Reach from Center of Swing Pivot: 6,644 mm 21' 10" │Dump Clearance: 2,700 mm 8' 10" │Reach at Dump Position: 730 mm 2' 5"│Bucket Rollback Angle @ Ground Level: 40º / Bucket Rollback Angle @ Full Height: 51º / Loader Dump Angle @ Full Height: 44º
  • Cab: 3,129 mm 10' 3" │Maximum Digging: 5,985 mm 19' 8" │Maximum to Bucket Hinge Pin: 3,478 mm 11' 5" │Operating: 4,293 mm 14' 1"
  • From Axle to Axle: 2,245 mm 7' 4"
  • 7,381 mm 24' 3"
  • 2,280 mm 7' 6"
  • 3,732 mm 12' 3"
  • (Minimum): 320 mm 1' 1"
  • Rear: 1,780 mm 5' 10"
  • Front Tires : 4,240 mm 13' 11" │ Front Bucket: 4,800 mm 15' 9"
  • Stabilizer: 3,491 mm 11' 5"
  • Digging: 5,366 mm 17' 7" │ Digging with Bucket Leveled: 88 mm 3"
  • Tank: 140.0 L 37.0 gal ¦DEF Tank: 12.0 L 3.2 gal
  • 23.0 L 6.1 gal
  • Oil: 120.0 L 31.7 gal
  • Engine: 8.5 L 2.2 gal ¦ Gear Box: 18.0 L 4.8 gal
  • Operating (Cab + Attachments): 9,000 kg 19,842 lbs
  • Load Sensing with Pilot Controls