2026 SANY® Telehandlers STH1256A

Information

2026 SANY® Telehandlers STH1256A

STH1256A

The SANY STH1256A telehandler has been 100% designed, built, and tested for your toughest jobs. To ensure that you can count on years of trouble-free operation, we’ve pushed this machine to the limit with durability testing including over 10,000 laps around our rough terrain test course and over 20,000 cycles on the lift structure at full rated load. The STH1256A telehandler also offers excellent visibility as the operator can see all 4 tires from the seated position with no unobstructed views behind the machine. Standard features include wide-angle rearview camera and reverse sensing system, LED work lights, flashing beacon, and lift hook. Choose from an open or fully enclosed cab with heat and AC and a selection of fork carriages and fork combinations allowing you to configure the STH1256A to perform for your needs.

Features may include:

  • Deutz engine, Dana axles and transmission, Parker hydraulics, and a Kawasaki load sense piston pump
  • Large, spacious cab offers improved operator comfort and reduced fatigue
  • Axle-mounted stabilizers allow for smoother frame leveling when deployed
  • Wide-angle rear camera gives unobstructed view behind the machine
  • Reverse sensing system
  • Simple maintenance with easy fluid level check and convenient access to maintenance items with side-mounted engine

Photos

Highlights

  • Tampa, Florida
  • 2026
  • SANY®
  • Telehandlers STH1256A
  • TCD 3.6
  • Dana VDT12000
  • Available
  • 8' 6" (2.59 m)
  • Maximum Lift: 56' 2" (17.13 m)│Stowed: 8' 5" (2.56 m)

Specifications

  • 2026
  • SANY®
  • Telehandlers
  • STH1256A
  • General
  • TCD 3.6
  • Deutz
  • 121 hp (90 kW)
  • 360 lbf-ft (488 Nm)
  • Dana VDT12000
  • Tire Size: 14.00-24
  • System: 24 volt
  • Maximum Drive Speed: 17 mph (28 kph)
  • Boom (Raise/Lower): 15 seconds (15 seconds) / Boom (Extend/Retract): 19 seconds (19 seconds) / Frame Leveling: +/- 10 degrees
  • Auxiliary Hydraulic: 17 gpm (63 L/min)
  • Auxiliary Hydraulic: 2,466 psi (17 MPa)
  • Kawasaki Load Sense Piston Pump
  • Maximum Forward Reach: 42' 11" (13.08 m)
  • Maximum Lift: 56' 2" (17.13 m)│Stowed: 8' 5" (2.56 m)
  • Stowed (Without Forks): 20' 7" (6.28 m)
  • 8' 6" (2.59 m)
  • (Center): 1' 6" (0.46 m) / (Axle): 1' 6" (0.45 m)
  • 11' 5" (3.49 m)
  • Outside (4WS): 14' 1" (4.30 m)
  • Tank: 36 gal (135 L)
  • Tank: 33 gal (124 L) ¦ System: 42 gal (159 L)
  • Maximum: 12,000 lbs (5,443 kg) / At Maximum Height: 7,000 lbs (3,175 kg) / Lift Capacity at Maximum Reach: 3,500 lbs (1,588 kg)
  • 35,494 lbs (16,100 kg)
  • Axles F/R: Dana 223 (Dana 213) │Hydraulic Manifold: Parker