2026 SANY® Wheel Loaders SW305K

Information

2026 SANY® Wheel Loaders SW305K

SW305K

The SANY SW305K wheel loader is the constant workhorse in your fleet. Beyond outstanding durability and reliability, this machine focuses on increased operator comfort for long production days. Your operators will enjoy unobstructed views to the bucket, a 360-degree camera, better ergonomics to lessen fatigue and features like USB port and keyless entry. The SW305K’s Z-bar linkage design delivers 27,652 lbf of breakout force. You can rely on this wheel loader’s time-tested components like the Deutz engine, ZF transmission and Kawasaki pumps–offering you an impressive service life over the long haul.

Features may include:

  • Engine: Deutz TCD6.1
  • Boom suspension system
  • Differential locking axle
  • Automatic transmission kick down
  • Bucket self-leveling and return to dig
  • Single joystick control
  • Third function hydraulics
  • 360-degree camera

Photos

Highlights

  • Tampa, Florida
  • 2026
  • SANY®
  • Wheel Loaders SW305K
  • TCD6.1
  • Shift Modes: Automatic, Manual, Kick Down ¦ Forward Gear 1-4: 4–25 mph / Reverse Gear 1-4: 4–17 mph
  • Available
  • 2,045mm 6' 9"
  • To Top of Cab: 3,405 mm 11' 2" │Max. Dump: 5,226 mm 17' 2" │Hinge Pin at Max. Lift: 3,845 mm 12' 7"

Specifications

  • 2026
  • SANY®
  • Wheel Loaders
  • SW305K
  • General
  • TCD6.1
  • Deutz
  • Max Gross: 181 hp / Net: 163 hp
  • Gross: 649 lbs ft
  • 372 in3
  • Shift Modes: Automatic, Manual, Kick Down ¦ Forward Gear 1-4: 4–25 mph / Reverse Gear 1-4: 4–17 mph
  • Service: Wet Disc ¦ Parking: Disk Brake
  • Raise: 5.6 sec / Dump: 1.6 sec / Float Down: 3.2 sec / Total Cycle Time: 10.4 sec
  • Bucket Capacity: 3.2 yd3 ¦ Breakout Force: 27,652 lbf
  • 3,916 PSI
  • Max: 58 GP
  • Clearance (full lift 45º dump): 8' 10" │ Reach (full lift 45º dump): 3' 5" │ Center Line of Rear Axle to Edge of Counterweight: 1,911 mm 6' 3" │Center Line of Front Axle to Center Pivot: 1,480 mm 4' 10" │ Dump Clearance at Max. Lift: 2,689 mm 8' 10" │Reach at Max. Lift and 45º Discharge: 1038 mm 3' 5" │Roll Back at Max. Lift: 61º │ Dump Angle at Max. Lift and Dump: 45º│ Roll Back at Carry Height: 49º │ Roll Back at Ground: 42º │Tail Angle to the Rear Wheel: 28º │ Clearance Circle to Outside of Tires: 5,382 mm 17' 8" │ Clearance Circle to Counterweight: 5,365 mm 17' 7" │ Max. Circle: 5,969 mm 19' 7"
  • To Top of Cab: 3,405 mm 11' 2" │Max. Dump: 5,226 mm 17' 2" │Hinge Pin at Max. Lift: 3,845 mm 12' 7"
  • Shipping without Attachments: 6,226 mm 20' 5" / With Bucket: 7,518 mm 24' 8"
  • 2,045mm 6' 9"
  • 407 mm 1' 4"
  • 3,000 mm 9' 10"
  • Dig Level Bucket: 122 mm 4.8"
  • Tank: 60 gal
  • Tipping Straight: 19,619 lbs / @ Full Term: 17,006 lbs
  • 8.7 gal ¦ Engine Crankcase: 4.1 gal
  • 14.5 gal
  • 9.2 gal
  • 9.2 gal
  • Tank: 34 gal / DEF Tank: 2.6 gal
  • Operating: 31,967 lbs
  • Front Axle: Fixed ¦Traction Aid: Manual Differential Lock ¦ Rear Axle: Oscillating ¦ Traction Aid: Open Differential