2026 SANY® 24" Load Center SCP100A

Information

2026 SANY® 24" Load Center SCP100A

SCP100A

Small but mighty with a wheelbase of 106”, the SCP100A allows for tight, stable turns making it perfect for applications like smaller lumber mills and precast where space is limited. Operators have a comfortable, spacious, climate-controlled cab with high visibility through the mast window. From the cab display, they have a rear camera feed and real-time data on hydraulic pressure, engine RPM, speed, loads, and fault codes. Multiple systems are engineered to improve control, performance, and reliability. For example, a dependable gear pump system allows for full control of the hydraulics which results in more controlled and accurate lifts. The SCP100A is backed by a 3-year/6,000-hour warranty and built to be easy to service, maintain and transport.

Features may include:

  • Powerful Cummins QSB 4.5L Diesel Engine
  • Heavy-duty Kessler Drive Axle
  • 24” Load Center and 106” Wheelbase with an Outside Turning Radius of 157”
  • 18.6 mph Travel Speed with Load and 79 ft/min Lifting Speed with Load
  • Three mast and two carriage options plus a range of fork sizes are available for maximum versatility

Photos

Highlights

  • Tampa, Florida
  • 2026
  • SANY®
  • 24" Load Center SCP100A
  • Diesel
  • Dana TE10
  • Available
  • 2,370 mm 93" │ Fork: 200 mm 8" │Carriage: 2,370 mm 93" │Aisle (with load length): 7,526 mm 296"
  • Mast Lowered: 3,890 mm 153" / Mast Extended: 5,732 mm 226" │Lift: 3,760 mm 148" │ Cab: 3,470 mm 137"

Specifications

  • 2026
  • SANY®
  • 24" Load Center
  • SCP100A
  • General
  • Diesel
  • Cummins
  • Output-Rated: 119 kW 160 HP
  • 4
  • 4.5L
  • 10.00-20 16PR
  • Dana TE10
  • Fwd/Rev: 3/3
  • Wet disc
  • Dry disc
  • Tire Type: Pneumatic / Drive: 10.00-20 16PR
  • Capacity: 2 x 12 V 120 Ah CCA
  • AMPS: 70A 24V
  • Travel Speed With Load: 30 km/h 18.6 mph / Without load: 31 km/h 19.2 mph ¦ Lifting Speed With Load: 0.4 m/s 79 ft/min / Without load: 0.45 m/s 89 ft/min ¦ Lowering Speed With Load: 0.5 m/s 98 ft/min / Without Load: 0.48 m/s 94 ft/min ¦Governed Speed: 2,300 rpm
  • Load Center: 610 mm 24" │ Mast Tilt, Fwd (α)/Back (β): 12º/15º │Load Distance: 886 mm 35" │ Fork Thickness: 75 mm 3" │ Fork Spread (in-in) Minimum: 95 mm 3.7" / Fork Spread (out-out) Maximum: 2,255 mm 89" │Gradeability @ 1 mph (1.6 km/h) With load: 35%
  • Mast Lowered: 3,890 mm 153" / Mast Extended: 5,732 mm 226" │Lift: 3,760 mm 148" │ Cab: 3,470 mm 137"
  • To Load Face: 4,364 mm 172" │ Fork: 2,440 mm 96"
  • 2,370 mm 93" │ Fork: 200 mm 8" │Carriage: 2,370 mm 93" │Aisle (with load length): 7,526 mm 296"
  • Minimum: 264 mm 10.4"
  • 2,700 mm 106"
  • Outside: 4,000 mm 157"
  • Rated: 10,000 kg 22,000 lbs
  • Tank: 164 L 43 gal ¦DEF tank: 19 L 5 gal
  • Tank, Main: 125 L 33 gal
  • With Load: 23,300 kg 51,400 lbs / Without Load: 7,800 kg 17,200 lbs
  • With Load: 1,800 kg 4,000 lbs / Without Load: 8,000 kg 17,600 lbs
  • Pull-Max: 103 kN 23,200 lbf
  • Unloaded Total Truck: 15,800 kg 34,800 lbs
  • Turbocharger: Water-cooled variable geometry │ Drive Axle: Kessler D61