2026 SANY® 24" Load Center SCP160A-6

Current SANY® Port Forklift-Trucks 24" Load Center

Swipe to View More

Year 2026
Make SANY®
Model 24" Load Center
Engine QSB 6.7 Diesel

Shop SANY® Pre-Owned

Product Details Specifications Photos

Year 2026
Manufacturer SANY®
Model Name 24" Load Center
Trim Name SCP160A-6
Generic Type (Primary) General
Engine QSB 6.7 Diesel
Engine Manufacturer Cummins
Emissions Type: EPA Tier 4 Final
Engine Power Output-Rated: 164 hp (122 kW)
Cylinder Liners 6
Displacement 6.7L

SCP160A-6

SANY’s SCP160A-6 is designed for lumber, pre-cast, steel, aluminum and breakbulk applications. For 35,000 lbs, it’s powerful yet nimble and has a small footprint allowing operators to work in tight yards. The robust 6.7L Cummins T4F engine delivers 164 hp at 2300 rpm, which pairs nicely with the Dana TE10 powershift transmission. Standard safety features include a reverse camera and radar detection sensors, dry chemical fire suppression, full LED work light package and lift override protection. This machine is easy for technicians to service boasting a powered tilting cab, onboard diagnostics and centralized grease points for the mast and steer axle. The intuitive display shows the load weight while the ergonomic joystick delivers precise hydraulic control for simplified operation. Backed by the industry’s strongest standard warranty at 3 years/6,000 hours.

Engine

Engine QSB 6.7 Diesel

Engine Manufacturer Cummins

Emissions Type: EPA Tier 4 Final

Engine Power Output-Rated: 164 hp (122 kW)

Cylinder Liners 6

Displacement 6.7L

Drivetrain

Steering 12.00-20 20PR

Transmission Dana TE10

Gears Fwd/Rev: 3/3

Brakes

Brake System Type Wet disc

Parking Brake Dry disc

Wheels & Tires

Wheels Tire Type: Pneumatic / Drive: 12.00-20 20PR

Battery

Battery Capacity: 24 V 120 Ah

Electric

Alternator AMPS: 24V (120A)

Operational

Operating Speed Travel Speed With Load: 15.5 mph (25 km/h) / Without load: 16.8 mph (27 km/h) ¦ Lifting Speed With Load: 69 ft/min (0.35 m/s) / Without load: 79 ft/min (0.40 m/s) ¦ Lowering Speed With Load: 0.5 m/s 98 ft/min / Without Load: 0.48 m/s 94 ft/min ¦Governed Speed: 2,300 rpm

Dimensions

Dimensions Load Center: 610 mm 24" │ Mast Tilt, Fwd (α)/Back (β): 12º/15º │Load Distance: 35" (891 mm) │ Fork Thickness: 3.5" (90 mm) │ Fork Spread (in-in) Minimum: 3.4" (86 mm) / Fork Spread (out-out) Maximum: 94.3" (2,396 mm) │Gradeability @ 1 mph (1.6 km/h) With load: 33%

Height Mast Lowered: 140" (3,545 mm) / Mast Extended: 212" (5,380 mm) │Lift: 3,760 mm 148" │ Cab: 138" (3,510 mm)

Length To Load Face: 196" (4,970 mm)│ Fork: 2,440 mm 96"

Width 103" (2,616 mm)│ Fork: 200 mm 8" │Carriage: 99" (2,520 mm) │Aisle (with load length): 319" (8,102 mm)

Ground Clearance Minimum: 11.8" (300 mm)

Wheelbase 130" (3,300 mm)

Turning Radius Outside: 163" (4,150 mm)

Capacities

Load Capacity, Land Rated: 35,000 lbs (16,000 kg)

Fuel Capacity Tank: 71 gal (270 L) ¦DEF tank: 19 L 5 gal

Hydraulic Capacity Tank, Main: 48 gal (180 L)

Axle Capacity, Front With Load: 72,530 lbs (32,900 kg) / Without Load: 21,160 lbs (9,600 kg)

Axle Capacity, Rear With Load: 5,730 lbs (2,600 kg) / Without Load: 21,830 lbs (9,900 kg)

Drawbar Capacity Pull-Max: 30,350 lbf (135 kN)

Weights

Weight Unloaded Total Truck: 42,990 lbs (19,300 kg)

Features

Features Turbocharger: Variable geometry¦ Drive Axle: Kessler D81

2026 SANY® 24" Load Center SCP160A-6