2026 SANY® 24" Load Center SCP160A-6

Information

2026 SANY® 24" Load Center SCP160A-6

SCP160A-6

SANY’s SCP160A-6 is designed for lumber, pre-cast, steel, aluminum and breakbulk applications. For 35,000 lbs, it’s powerful yet nimble and has a small footprint allowing operators to work in tight yards. The robust 6.7L Cummins T4F engine delivers 164 hp at 2300 rpm, which pairs nicely with the Dana TE10 powershift transmission. Standard safety features include a reverse camera and radar detection sensors, dry chemical fire suppression, full LED work light package and lift override protection. This machine is easy for technicians to service boasting a powered tilting cab, onboard diagnostics and centralized grease points for the mast and steer axle. The intuitive display shows the load weight while the ergonomic joystick delivers precise hydraulic control for simplified operation. Backed by the industry’s strongest standard warranty at 3 years/6,000 hours.

Photos

Highlights

  • Tampa, Florida
  • 2026
  • SANY®
  • 24" Load Center SCP160A-6
  • QSB 6.7 Diesel
  • Dana TE10
  • Available
  • 103" (2,616 mm)│ Fork: 200 mm 8" │Carriage: 99" (2,520 mm) │Aisle (with load length): 319" (8,102 mm)
  • Mast Lowered: 140" (3,545 mm) / Mast Extended: 212" (5,380 mm) │Lift: 3,760 mm 148" │ Cab: 138" (3,510 mm)

Specifications

  • 2026
  • SANY®
  • 24" Load Center
  • SCP160A-6
  • General
  • QSB 6.7 Diesel
  • Cummins
  • Type: EPA Tier 4 Final
  • Output-Rated: 164 hp (122 kW)
  • 6
  • 6.7L
  • 12.00-20 20PR
  • Dana TE10
  • Fwd/Rev: 3/3
  • Wet disc
  • Dry disc
  • Tire Type: Pneumatic / Drive: 12.00-20 20PR
  • Capacity: 24 V 120 Ah
  • AMPS: 24V (120A)
  • Travel Speed With Load: 15.5 mph (25 km/h) / Without load: 16.8 mph (27 km/h) ¦ Lifting Speed With Load: 69 ft/min (0.35 m/s) / Without load: 79 ft/min (0.40 m/s) ¦ Lowering Speed With Load: 0.5 m/s 98 ft/min / Without Load: 0.48 m/s 94 ft/min ¦Governed Speed: 2,300 rpm
  • Load Center: 610 mm 24" │ Mast Tilt, Fwd (α)/Back (β): 12º/15º │Load Distance: 35" (891 mm) │ Fork Thickness: 3.5" (90 mm) │ Fork Spread (in-in) Minimum: 3.4" (86 mm) / Fork Spread (out-out) Maximum: 94.3" (2,396 mm) │Gradeability @ 1 mph (1.6 km/h) With load: 33%
  • Mast Lowered: 140" (3,545 mm) / Mast Extended: 212" (5,380 mm) │Lift: 3,760 mm 148" │ Cab: 138" (3,510 mm)
  • To Load Face: 196" (4,970 mm)│ Fork: 2,440 mm 96"
  • 103" (2,616 mm)│ Fork: 200 mm 8" │Carriage: 99" (2,520 mm) │Aisle (with load length): 319" (8,102 mm)
  • Minimum: 11.8" (300 mm)
  • 130" (3,300 mm)
  • Outside: 163" (4,150 mm)
  • Rated: 35,000 lbs (16,000 kg)
  • Tank: 71 gal (270 L) ¦DEF tank: 19 L 5 gal
  • Tank, Main: 48 gal (180 L)
  • With Load: 72,530 lbs (32,900 kg) / Without Load: 21,160 lbs (9,600 kg)
  • With Load: 5,730 lbs (2,600 kg) / Without Load: 21,830 lbs (9,900 kg)
  • Pull-Max: 30,350 lbf (135 kN)
  • Unloaded Total Truck: 42,990 lbs (19,300 kg)
  • Turbocharger: Variable geometry¦ Drive Axle: Kessler D81